June 25, 2026

Copper Nickel Alloys: 90/10 vs 70/30 Cupronickel Comparison Copper-nickel alloys (cupronickels) are among the most important materials for marine and seawater applications. The two most common grades — 90/10 Cu-Ni (C70600) and 70/30 Cu-Ni (C71500) — offer exceptional resistance to seawater corrosion, biofouling, and erosion. This guide compares these two alloys to help you select […]

Steel Pipe Support Spacing: How to Calculate for Your Project Proper pipe support spacing is critical for the structural integrity of any piping system. Supports that are too far apart cause excessive sag, stress concentrations at joints, and potential failure. Supports that are too close together waste material and labor costs. This guide explains how

Aluminum Surface Finishes: Anodizing vs Powder Coating vs Painting Aluminum’s natural oxide layer provides basic corrosion protection, but most commercial and architectural applications require enhanced surface finishes for aesthetics, durability, or both. The three dominant finishing methods — anodizing, powder coating, and liquid painting — each offer distinct advantages. This guide compares these finishes to

Structural Steel Connections: Bolted vs Welded Joints Explained The connections between structural steel members are the critical points that determine a building’s strength, stiffness, and safety. The two primary methods — bolted connections and welded connections — each offer distinct advantages for different situations. Understanding when to use each type is essential for structural engineers,

Steel Coil Coating Types: PE, SMP, HDP, PVDF Compared When specifying pre-painted steel coil (PPGI/PPGL) for roofing, cladding, or building products, the coating type is the single most important factor determining service life and appearance retention. The four main organic coating systems — PE, SMP, HDP, and PVDF — offer dramatically different performance levels and

Stainless Steel Passivation: Why It Matters for Corrosion Resistance Stainless steel passivation is a critical post-fabrication treatment that maximizes the natural corrosion resistance of stainless steel. Despite its name, stainless steel isn’t completely “stain-proof” — it requires proper passivation to form the protective chromium oxide layer that prevents rust and corrosion. This guide explains why

Galvanized Steel Pipe vs Black Steel Pipe: When to Use Which Choosing between galvanized steel pipe and black steel pipe is a fundamental decision in any piping project. While both start from the same base material — carbon steel — their different surface treatments create distinct properties that make each suitable for specific applications. This

Steel Pipe Threading: NPT, BSP, and Metric Standards Explained Steel pipe threading is one of the most common methods for creating leak-tight connections in piping systems. Understanding the different pipe thread standards — NPT, BSP, and Metric — is essential for selecting the right fittings, ensuring proper sealing, and avoiding cross-threading failures. This guide explains

Inconel vs Hastelloy: Nickel Alloy Selection for Extreme Environments When engineering components for extreme temperatures, corrosive environments, or high-stress applications, two nickel superalloy families dominate the selection: Inconel and Hastelloy. While both offer exceptional performance beyond the capability of stainless steels, they excel in different conditions. This guide compares these critical materials to help you